Learn A Few Points About the Steam Hose to Keep You Out of Danger

You are here:

Home
BLOG
Learn A Few Points About the Steam Hose to Keep You Out of Danger

Steam hoses need to be handled carefully and installed properly otherwise it might lead to a bigger issue later on.

Here are some of the safety-related facts which you need to know about steam hoses:

1.EXTERNAL DAMAGE AND WEAR:

Steam hose can prove to be hazardous for both the factory and residential setups and should not be used in case you find out that it is worn out.

If not treated properly, the steam hose can cause damage to the reinforcement internally which can eventually reduce its work life. Not only this, but it can also lead to unexpected catastrophic failures. Thus, it is essential that you inspect the damages and make sure that the steam hose is properly fitted on the application.

2.PRESSURE, VACUUM, AND TEMPERATURE:

Avoid using a steam hose that is not certified or has low or no ratings for the pressure and temperature of the system that it is connected to.

If you are going attach a hose to the system that has high rated pressure or temperature then it might lead to premature failure of the hose assembly. Besides, the steam hoses are not designed to resist vacuum and thus they should not be used if there is a vacuum in the system.

3.EXTERNAL ENVIRONMENTAL CONDITIONS AND STORAGE:

There are times when even a good quality hose might get affected by external environmental factors such as chemicals, salt water, sunlight, and even contamination. These factors can affect the functioning of the hose due to which it might need to be replaced.When you are storing or using new hoses,you also need to look out for above factors.

4.PROPER INSTALLATION:

Make sure that the hose assemblies are safely installed and fitted to the application. Check the length of the hose between the connection points and make sure that there is proper pressure distribution.

Use vertical outlets if you want to reduce the chances of kinks and reduce stress on the hose.