How to install pneumatic hoses
During use
First of all, it is necessary to determine what the properties of the medium the hose will convey, and whether the hose can carry this medium. For example, if you want to convey oily substances, you cannot use EPDM hoses.
If you use oil-resistant nitrile rubber hoses; and, work Try to avoid dragging the hose, which will damage the outer rubber layer of the hose.
In addition, the working pressure should also be within the limit range, otherwise it will cause damage to the material of the tube body; at the same time, it cannot work in the air, fire and water in the supermarket for a long time, which will also accelerate the aging of the rubber tube.
During storage
First of all, the inside of the hose must be emptied, especially the corrosive acid and alkali and other substances should not be left in it; the hose should not be bent excessively.
Although the hose has a certain toughness, it is also limited, beyond what it can carry, the hose The service life of the rubber hose will be greatly shortened; in addition, the storage environment should be dry and ventilated, and stored in a cool place.
Moisture, light, temperature, etc. are all factors of rubber aging, and the rubber hose is also made of rubber. Said the same applies.
In transportation
First of all, avoid excessive bending of the hose, and do not let heavy objects press on the rubber; in addition, do not mix the hose with substances such as acid and alkali, organic solvents, and gram to avoid chemical reactions between these substances and the rubber; avoid the hose and Sharp objects are placed close to each other to avoid accidental scratches.
Knowing the above, you may have a deeper impression on the use of hose. If you have any questions, you can contact us at any time. As a professional hose distributor, Orientflex will choose the most suitable hose for you.
Related posts
