1.Introduction of drip irrigation belt
Drip irrigation belt is a kind of water-saving irrigation equipment commonly used in arid areas, and its irrigation rate can reach 95%. Drip irrigation has more water-saving advantages than flood irrigation. Drip irrigation comes in two forms, one is an inlay patch drip irrigation tape, and the other is a labyrinth drip irrigation tape. The inlay patch drip irrigation tape is the inlay flat dripper drip irrigation tape. It is an integrated drip irrigation belt with a flat shape dripper inlaid on the inner wall of the tube. Evenly. Widely used in greenhouses, irrigation of cash crops in the field. The labyrinth drip irrigation belt adopts the labyrinth flow channel and the drip hole one-time vacuum integrated hot pressing forming technology, which has good adhesion and high manufacturing accuracy. The labyrinth drip irrigation belt is widely used in irrigation of crops such as fields, greenhouses, fruit trees, flowers, vegetables, cotton, corn, and wheat. It is a professional equipment that saves water and energy, and increases production and income.
2. Characteristics of drip irrigation belt
Features of labyrinth drip irrigation belt: 1), the labyrinth runner and the drip hole are vacuum-pressed as a whole, with good adhesion and high manufacturing accuracy. 2), multi-port turbulent water, strong anti-blocking ability. 3) The design of the labyrinth flow channel, the water outlet is even, reaching 85% or more, and laying up to 80m. 4) Light weight, easy installation and management, low labor installation cost.
Features of patch drip irrigation tape: 1), built-in drip drip filter with built-in filter window, good anti-blocking performance. 2), turbulent flow channel design. Irrigation is even. 3), the dripper and the pipe have a strong integrity.
3. Difference between drip irrigation belt and micro spray belt
1. The difference between the drip pattern of the micro-spray belt and the drip irrigation belt: the water outlet of the micro-spray belt is in the form of needle eye, and it is generally the spray nozzle with oblique three holes, oblique five holes, and oblique seven holes. The water output of the micro-spray belt is not fixed according to the pressure difference, and the water output is large. The water of the micro-spray belt is sprayed to the high places on both sides, and the water outlet is not easy to be blocked. The dripper strength of drip irrigation belt is generally 2-2.5L / hour. The dripper of the drip irrigation belt is easily clogged.
2. The difference between the appearance of the micro-spray belt and the drip irrigation belt: The difference between the appearance of the micro-spray belt and the drip irrigation belt is flat ribbon. And the wall thickness of common specifications is 0.2mm. There is no dripper inside the micro-spray belt, and the protruding part of the drip irrigation belt is the dripper of the inlay patch. Drip irrigation tapes are in the form of drip tips with embedded patches. The drip tips have labyrinth channels on them to regulate water flow.