Silicone hose sleeve offers you excellent hose protection solution
In the last piece, we learn how to use a fire hose. While in this piece, let’s learn the detailed procedure.
Team member No. 1 has connected the water gun to the fire hose before arriving at the fire scene. Then holds the gun and stands firm according to standard actions. While team member No. 2 stands on the corresponding side as an auxiliary gunner, holding it with both hands.
After team members No. 1 and No. 2 arrived at the fire scene and took their positions. Then they ordered to boil the water.” Team member No. 3 gave the order to No. 4. Then No.4 repeats the boil water command and opened the fire hydrant.
No.1 controls the water gun to spray water towards the fire scene. Besides, move the position according to the fire situation.
When the fire is put out, No. 1 gives the command to “Close the team” backwards. Then No. 3 repeats the command to No. 4, and No. 4 repeats the command. At the same time, he closes the fire hydrant, removes the connector and runs to the other end of the hose No. 1. No. 3 removes two
Connect the water hose and straighten the hose to drain out the remaining water, and then wind up the No. 1 hose with No. 4.
After the water pressure stops, No. 1 removes the water gun, takes the connector in his right hand, runs to the other end of the No. 2 water hose, stacks the hose on the lower hose, puts down the gun, and returns to assist the No. 2 team member in rewinding the hose. Water hose No. 2.
After the water hose is rolled up, No. 1 takes the water gun, No. 2 and No. 4 each take the water hose, run back to the team.
Related posts
